DTC Descriptor
DTC P0AFA
- Hybrid Battery System Voltage Low - ACCM 300V
Diagnostic Fault Information
Typical Scan Tool Data
Circuit/System Description
The air conditioner control module (ACCM) monitors the high voltage direct current (HVDC) voltage to ensure that the voltage stays within the
proper range. Damage to components, and incorrect data may occur when the voltage is out of range. If the ACCM detects low HVDC voltage,
then DTC P0AFA will set.
Conditions for Running the DTC
* The engine is running or is in autostop mode.
* The 12V system voltage is between 9.5-18 V.
Conditions for Setting the DTC
The ACCM detects that the hybrid battery voltage is less than 191 volts for 3 seconds.
Action Taken When the DTC Sets
The air conditioning is disabled.
Conditions for Clearing the DTC
* The DTC will pass when the ACCM detects a hybrid battery voltage greater than 201 V for 3 seconds.
* A history DTC will clear after 40 consecutive warm-up cycles have occurred without a malfunction.
Reference Information
Schematic Reference
* HVAC Schematics (See: Heating and Air Conditioning/Diagrams/Electrical Diagrams/HVAC - Automatic)
* Hybrid Controls Schematics ()
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
* Heating and Air Conditioning System Description and Operation (HP2) ()
* High Voltage Monitoring Systems Description ()
