Saturday, January 11, 2020

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1034

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1034



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC P0068



- Throttle Body Airflow Performance



DTC P1101



- Intake Air Flow System Performance



Circuit/System Description



The engine control module (ECM) compares actual airflow based on throttle position (TP) to a calculated airflow based on manifold absolute



pressure (MAP) sensor, and mass air flow (MAF).



Conditions for Running the DTC



DTC P0068



* The engine speed is greater than 800 RPM.



* The ignition voltage is greater than 6.0 V.



* The throttle actuator control system is not in reduced power mode.



* The DTC runs continuously when the above conditions are met.



DTC P1101



* DTCs P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0335, P0336 are not set



* The engine speed is between 400-7,000 RPM



* The engine coolant temperature (ECT) is between 69-127掳C (156-260掳F).



* The intake air temperature (IAT) is between -20 to +125掳C (-4 to +257掳F).



* The DTC runs continuously when the above conditions are met.



Conditions for Setting the DTC



The ECM detects that the actual airflow rate is greater than the calculated airflow.



Action Taken When the DTC Sets



* DTC P0068 is a type A DTC.



* DTC P1101 is a type B DTC.



Conditions for Clearing the DTC



* DTC P0068 is a type A DTC.



* DTC P1101 is a type B DTC.



Reference Information



Schematic Reference



Engine Controls Schematics (LAU) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics



(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General



Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring



Repairs/Wiring Repairs)



DTC Type Reference



Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code



(DTC) Type Definitions)