2010 Cadillac Truck Escalade AWD V8-6.2L Page 484
Diagnostic Fault Information
Typical Scan Tool Data
Circuit/System Description
The battery current sensor is a 3-wire hall effect current sensor. The battery current sensor monitors the battery current. The signal circuit is an
input to the body control module (BCM). The sensor creates a 5-volt pulse width modulation (PWM) signal of 128 Hz with a duty cycle of 0-100
percent. Normal duty cycle is between 4-96 percent. The signal circuit is an input to the body control module (BCM). If the duty cycle is outside of
the normal range, DTC B1516 08 sets. The BCM also tests for correct polarity of the sensor. If the BCM detects positive current flow with the
engine OFF, DTC B1516 66 sets.
Conditions for Running the DTC
B1516 08
The BCM is awake.
B1516 66
* The BCM is awake.
* The engine is OFF.
* The hood and doors are closed.
* DTC B1516 08 has run and passed during this ignition cycle.
* DTC B1516 66 has not already run and passed during this ignition cycle.
Conditions for Setting the DTC
B1516 08
The BCM detects the sensor signal duty cycle is less than 4 percent or greater than 96 percent for 2 minutes.
B1516 66
The BCM detects positive battery current when the engine is OFF.
Action Taken When the DTC Sets
Regulated voltage control (RVC) is disabled.
Conditions for Clearing the DTC
* The DTC passes when the battery sensed current returns to the normal range for 15 seconds.
