Circuit/System Description
Voltage is supplied to the electronic suspension control (ESC) module by the battery positive (B+) voltage circuit. The ESC module monitors the
supplied voltage to determine if it is within a valid operating range. Damage to components, and incorrect data may occur if the voltage is out of
range. The ESC module disables all outputs, and sets DTC C0895 00, if high or low battery voltage is detected.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
Battery voltage is outside the normal range of 9.0-15.5 volts.
Action Taken When the DTC Sets
The ESC module disables all functionality.
Conditions for Clearing the DTC
* A current DTC will clear when the ESC module receives battery voltage in the normal range of 9-15.5 volts.
* A history DTC will clear if the condition does not return after 50 consecutive ignition cycles.
Diagnostic Aids
* A high or low voltage value in multiple modules indicates a concern in the charging system.
* Overcharging with a battery charger or jump starting can cause this DTC to set.
* Inspect ground connection G400. Verify that it is clean and tight.
Reference Information
Schematic Reference
* Electronic Suspension Control Schematics (See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic
)/Diagrams/Electrical Diagrams/Electronic Suspension Control)
* Power Distribution Schematics (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System
Diagram/Power Distribution Schematics)
* Ground Distribution Schematics (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System
Diagram/Ground Distribution Schematics)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
* Electronic Suspension Control Description and Operation (See: Steering and Suspension/Suspension/Suspension Control ( Automatic -
Electronic )/Description and Operation/Electronic Suspension Control Description and Operation)
* Charging System Description and Operation (See: Starting and Charging/Charging System/Description and Operation)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
