Showing posts with label DTC P0712. Show all posts
Showing posts with label DTC P0712. Show all posts

Friday, November 20, 2020

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 2248

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 2248

DTC P0712

- Transmission Fluid Temperature (TFT) Sensor Circuit Low Voltage

DTC P0713

- Transmission Fluid Temperature (TFT) Sensor Circuit High Voltage

Circuit/System Description

The transmission fluid temperature (TFT) sensor is located inside of the transmission control module (TCM) assembly which has no serviceable

parts. The TFT sensor provides transmission fluid temperature to the TCM. This fault is handled inside the TCM and no external circuits are

involved.

Conditions for Running the DTC

P0711

* DTCs P0101, P0102, P0103, P0116, P0117, P0118, P0121, P0122, P0123, P0336, P0337, P0338, P0711, P0716, P0722, P0723, P0742, or

P2726 are not set.

* Ignition voltage is 8.6 volts or greater.

* The engine coolant temperature (ECT) is valid.

* The TCM internal temperature is -50掳C to +170掳C (-56掳F and +336掳F) at start up.

* The engine speed is 500 RPM or greater for 5 seconds.

* The vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* The engine coolant temperature is between -39掳C and 149掳C (-38掳F and 300掳F).

* The accelerator pedal position signal is valid.

* The engine torque signal is valid.

P0712 or P0713

* DTCs P0712, P0713, P0716, P0717, P0722, or P0723 are not set.

* Ignition voltage is 8.6 volts or greater.

* The engine speed is 500 RPM or greater for 5 seconds.

Conditions for Setting the DTC

P0711 Condition 1

* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* TCC slip speed is 150 RPM or greater.

* The TFT is between -50掳C and +21掳C (-58掳F and +70掳F) at start up.

* The TFT has changed by less than 2.0掳C (3.6掳F) in 2 minutes.

* The ECT is 70掳C (158掳F) or greater.

* The ECT has increased by 55掳C (99掳F) since startup.

Condition 2

* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* TCC slip speed is 120 RPM or greater for 5 minutes.

* The TFT is between 129-170掳C (264-507掳F).

* The TFT has changed by less than 2.0掳C (3.6掳F) in 2 minutes.

* The ECT is 70掳C (158掳F) or greater.

* The ECT has increased by 55掳C (99掳F) since startup.

Condition 3

The TFT changes by 20掳C (36掳F) or greater 5 times over 7 seconds.

Condition 4

The TFT has not changed more than 20掳C (36掳F) during the following conditions:

* The TFT temperature at start up is -50掳C (-58掳F) for 42 minutes.

* The TFT temperature at start up is -25掳C (-13掳F) for 17 minutes.

* The TFT temperature at start up is -10掳C (14掳F) for 14 minutes.

* The TFT temperature at start up is -5掳C (23掳F) for 9 minutes.

* The TFT temperature at start up is 20掳C (68掳F) for 4 minutes.

P0712

The TFT is -74掳C (-101掳F) or less for 13 seconds or more.

Tuesday, February 25, 2020

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 2618

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 2618

DTC P0712

- Transmission Fluid Temperature (TFT) Sensor Circuit Low Voltage

DTC P0713

- Transmission Fluid Temperature (TFT) Sensor Circuit High Voltage

Diagnostic Fault Information

Typical Scan Tool Data

Circuit/System Description

The primary source of heat in the transmission is the drive motor generators. The drive motor generators are cooled by the transmission fluid. Hot

fluid exits the drive motor generators and flows to the transmission cooler supply line. The supply line connects to the cooler, which is in front of

the radiator. The transmission fluid cooler pipe assembly is equipped with an internal thermostat that opens at 80掳C (176掳F) for optimum

transmission operation and fuel economy. The transmission cooler pipe thermostat is part of the transmission fluid cooler pipe assembly, located

near the transmission and is not serviced separately. From the cooler, the fluid returns through the transmission fluid cooler pipe assembly and

enters the lubrication circuits. After lubricating the internal components, the fluid returns to the oil pan. The transmission fluid temperature sensor is

located in the control solenoid valve assembly and is not serviced separately.

Conditions for Running the DTC

* No OSS DTCs P0721, P0722, or P0723, P077B, P215C.

* The engine run time is greater than 5 seconds.

* The system voltage is 11-18 V.

* The estimated drive motor power loss is greater than 0.4 kw for 200 seconds.

* The OSS is greater than 200 RPM for 5 seconds.

P0711

* The Trans. Fluid Temp. parameter is -50 to +21掳C (-58 to +70掳F) at start up.

* The ECT is greater than 70掳C (158掳F).

* The ECT is greater than 55掳C (131掳F) at start up.

* The vehicle speed is greater than 8 km/h (5 mph) for 300 seconds.

* The vehicle speed is less than 200 km/h (124 mph) for 5 seconds.

* The TCM temperature parameter is -49 to +169掳C (-56 to +336掳F).

P0712

DTC P0712 is not failed this ignition cycle.

P0713

DTC P0713 is not failed this ignition cycle.

Conditions for Setting the DTC

P0711 - Fail Case 1

* Vehicle speed is greater than 8 km/h (5 mph) for 300 seconds cumulative.

* The Trans. Fluid Temp. parameter is between -50 and +21掳C (-58 and +70掳F).

* The Trans. Fluid Temp. parameter has changes by less than 2.0掳C (3.6掳F) in 100 seconds.

* The engine coolant temperature (ECT) is greater than 70掳C (158掳F).

* The ECT has increased by 55掳C (99掳F) since startup.

Friday, December 20, 2019

2010 Cadillac Truck Escalade AWD V8-6.2L Page 2353

DTC P0712

- Transmission Fluid Temperature (TFT) Sensor Circuit Low Voltage

DTC P0713

- Transmission Fluid Temperature (TFT) Sensor Circuit High Voltage

Circuit/System Description

The transmission fluid temperature (TFT) sensor is located inside of the transmission control module (TCM) assembly which has no serviceable

parts. The TFT sensor provides transmission fluid temperature to the TCM. This fault is handled inside the TCM and no external circuits are

involved.

Conditions for Running the DTC

P0711

* DTCs P0101, P0102, P0103, P0116, P0117, P0118, P0121, P0122, P0123, P0336, P0337, P0338, P0711, P0716, P0722, P0723, P0742, or

P2726 are not set.

* Ignition voltage is 8.6 volts or greater.

* The engine coolant temperature (ECT) is valid.

* The TCM internal temperature is -50锟斤拷C to +170锟斤拷C (-56锟斤拷F and +336锟斤拷F) at start up.

* The engine speed is 500 RPM or greater for 5 seconds.

* The vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* The engine coolant temperature is between -39锟斤拷C and 149锟斤拷C (-38锟斤拷F and 300锟斤拷F).

* The accelerator pedal position signal is valid.

* The engine torque signal is valid.

P0712 or P0713

* DTCs P0712, P0713, P0716, P0717, P0722, or P0723 are not set.

* Ignition voltage is 8.6 volts or greater.

* The engine speed is 500 RPM or greater for 5 seconds.

Conditions for Setting the DTC

P0711 Condition 1

* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* TCC slip speed is 150 RPM or greater.

* The TFT is between -50锟斤拷C and +21锟斤拷C (-58锟斤拷F and +70锟斤拷F) at start up.

* The TFT has changed by less than 2.0锟斤拷C (3.6锟斤拷F) in 2 minutes.

* The ECT is 70锟斤拷C (158锟斤拷F) or greater.

* The ECT has increased by 55锟斤拷C (99锟斤拷F) since startup.

Condition 2

* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.

* TCC slip speed is 120 RPM or greater for 5 minutes.

* The TFT is between 129-170锟斤拷C (264-507锟斤拷F).

* The TFT has changed by less than 2.0锟斤拷C (3.6锟斤拷F) in 2 minutes.

* The ECT is 70锟斤拷C (158锟斤拷F) or greater.

* The ECT has increased by 55锟斤拷C (99锟斤拷F) since startup.

Condition 3

The TFT changes by 20锟斤拷C (36锟斤拷F) or greater 5 times over 7 seconds.

Condition 4

The TFT has not changed more than 20锟斤拷C (36锟斤拷F) during the following conditions:

* The TFT temperature at start up is -50锟斤拷C (-58锟斤拷F) for 42 minutes.

* The TFT temperature at start up is -25锟斤拷C (-13锟斤拷F) for 17 minutes.

* The TFT temperature at start up is -10锟斤拷C (14锟斤拷F) for 14 minutes.

* The TFT temperature at start up is -5锟斤拷C (23锟斤拷F) for 9 minutes.

* The TFT temperature at start up is 20锟斤拷C (68锟斤拷F) for 4 minutes.

P0712

The TFT is -74锟斤拷C (-101锟斤拷F) or less for 13 seconds or more.