2010 Cadillac Truck SRX FWD V6-3.0L Page 1288
DTC P2153
- Cylinder 3 Injector High Control Circuit Low Voltage
DTC P2154
- Cylinder 3 Injector High Control Circuit High Voltage
DTC P2156
- Cylinder 4 Injector High Control Circuit Low Voltage
DTC P2157
- Cylinder 4 Injector High Control Circuit High Voltage
DTC P216B
- Cylinder 5 Injector High Control Circuit Low Voltage
DTC P216C
- Cylinder 5 Injector High Control Circuit High Voltage
DTC P216E
- Cylinder 6 Injector High Control Circuit Low Voltage
DTC P216F
- Cylinder 6 Injector High Control Circuit High Voltage
Diagnostic Fault Information
Circuit/System Description
The engine control module (ECM) supplies voltage to each fuel injector on the injector high voltage supply circuits. The ECM energizes each fuel
injector by grounding the high voltage control circuit of the fuel injector. The ECM monitors the status of the injector high voltage supply circuits
and the fuel injector high voltage control circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is
disabled.
Conditions for Running the DTC
* The engine is running.
* The ignition voltage is between 11-18 V.
* The DTCs run continuously when the above conditions are met.
Conditions for Setting the DTC
