Friday, December 25, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 521

2010 Cadillac CTS Sedan AWD V6-3.6L Page 521



DTC B2705



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptor



DTC B2705 02



- Gearshift Unlock Circuit Short to Ground



Diagnostic Fault Information



Circuit/System Description



The body control module (BCM) controls the automatic transmission shift lock control solenoid by providing a battery positive voltage to the



solenoid. The BCM utilizes a smart driver to control the voltage supply circuit to the automatic transmission shift lock control solenoid. The smart



driver monitors the voltage and current flow of the control circuit.



Conditions for Running the DTC



* The ignition switch is in the ON position.



* The brake pedal is pressed.



* The transmission is in the PARK position.



Conditions for Setting the DTC



Sets if there is a short to ground in the automatic transmission shift lock control solenoid control circuit.



Action Taken When the DTC Sets



The BCM will not attempt to enable the voltage supply circuit of the automatic transmission shift lock control solenoid until the next key cycle.



Conditions for Clearing the DTC



* A current DTC will clear when the malfunction is no longer present and the ignition switch is cycled.



* All BCM history codes will clear after 100 ignition cycles with no current codes active during the 100 ignition cycles.



Reference Information



Schematic Reference



Shift Lock Control Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Interlock/Diagrams/Electrical



Diagrams)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views)



Description and Operation



Automatic Transmission Shift Lock Control Description and Operation (See: Transmission and Drivetrain/Automatic



Transmission/Transaxle/Shift Interlock/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit



Testing/Testing for Intermittent Conditions and Poor Connections)