Monday, November 23, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 554

2010 Cadillac CTS Sedan AWD V6-3.6L Page 554



Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)



Scan Tool Reference



Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information



Special Tools



J 43241 Keyless Entry Tester



Circuit/System Verification



Attempt to program the keyless entry transmitter, refer to Remote Control Door Lock Transmitter Programming (without Y41) (See: Accessories



and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Entry Transmitter/Testing and Inspection/Remote Control Door Lock



Transmitter Programming (without Y41)). The transmitter should program.



Circuit/System Testing



1. Verify that the transmitter is the correct transmitter for the vehicle.



瀚慖f not correct, replace the transmitter.



2. Place the transmitter on the test pad of the J 43241 and press each button of the transmitter one at a time. The tester should sound a tone and



illuminate a green light when each button is pressed.



瀚慖f one or more buttons does not sound the tone and illuminate the green light, replace the transmitter battery and retest with the J 43241 .



If the condition continues after battery replacement, replace the transmitter.



3. Attempt to program the transmitter, refer to Remote Control Door Lock Transmitter Programming (without Y41) (See: Accessories and



Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Keyless Entry Transmitter/Testing and Inspection/Remote Control Door



Lock Transmitter Programming (without Y41)). The transmitter should program.



瀚慖f the transmitter does not program, replace the RCDLR.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Control Module References (See: Testing and Inspection/Programming and Relearning) for RCDLR replacement, setup, and programming



B3109



DTC B3109, B3110, B3111, or B3112



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptors



DTC B3109 00



- Keyless Entry Transmitter 1 Low Battery



DTC B3110 00



- Keyless Entry Transmitter 2 Low Battery



DTC B3111 00



- Keyless Entry Transmitter 3 Low Battery



DTC B3112 00



- Keyless Entry Transmitter 4 Low Battery



Circuit/System Description