2010 Cadillac CTS Sedan AWD V6-3.0L Page 1744
DTC Descriptor
DTC P0068
- Throttle Body Airflow Performance
DTC P1101
- Intake Air Flow System Performance
Circuit/System Description
The engine control module (ECM) compares actual airflow based on throttle position (TP) to a calculated airflow based on manifold absolute
pressure (MAP) sensor, and mass air flow (MAF).
Conditions for Running the DTC
DTC P0068
* The engine speed is greater than 800 RPM.
* The ignition voltage is greater than 6.0 V.
* The throttle actuator control system is not in reduced power mode.
* The DTC runs continuously when the above conditions are met.
DTC P1101
* DTCs P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0335, P0336 are not set
* The engine speed is between 400-7,000 RPM
* The engine coolant temperature (ECT) is between 69-127掳C (156-260掳F).
* The intake air temperature (IAT) is between -20 to +125掳C (-4 to +257掳F).
* The DTC runs continuously when the above conditions are met.
Conditions for Setting the DTC
The ECM detects that the actual airflow rate is greater than the calculated airflow.
Action Taken When the DTC Sets
* DTC P0068 is a type A DTC.
* DTC P1101 is a type B DTC.
Conditions for Clearing the DTC
* DTC P0068 is a type A DTC.
* DTC P1101 is a type B DTC.
Reference Information
Schematic Reference
Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics
(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code
(DTC) Type Definitions)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Circuit/System Testing
1. Verify none of the following conditions exist:
