2010 Cadillac CTS Sedan AWD V6-3.6L Page 1970

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1970

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2306

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1991

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1991

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2316

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1994

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1994

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

Engine Controls

DTC P2534

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions)provides an overview of each diagnostic category.

DTC Descriptor

DTC P2534

- Ignition 1 Switch Circuit Low Voltage

Diagnostic Fault Information

Circuit/System Description

The fuel pump control module monitors the ignition voltage circuit in order to determine if the voltage is within the normal operating range.

Conditions for Running the DTC

The engine is running.

Conditions for Setting the DTC

The FPCM detects that the IGN voltage is less than 6.0 V.

Action Taken When the DTC Sets

DTC P2534 is a Type A DTC.

Conditions for Clearing the DTC

DTC P2534 is a Type A DTC.

Reference Information

Schematic Reference

Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics

(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views)

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1967

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1967

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2304

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1964

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1964

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2303

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1976

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1976

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2309

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1979

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1979

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2310

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1982

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1982

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2312

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1973

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1973

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2307

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1985

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1985

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2313

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1988

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1988

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2315

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1961

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1961

4. Connect a test lamp between the each of the ground circuits terminal A, and terminal B, and B+. The test lamp should illuminate on each

circuit.

瀚慖f the test lamp does not illuminate, test the suspected circuit for an open/high resistance.

5. If all circuits/connections test normal, replace the T8 ignition coil.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

* Ignition Coil Replacement - Bank 1 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 1)

* Ignition Coil Replacement - Bank 2 (See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Ignition Coil

Replacement - Bank 2)

* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming

P2301

DTC P0351-P0356, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 (w/LLT)

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptors

DTC P0351

- Ignition Coil 1 Control Circuit

DTC P0352

- Ignition Coil 2 Control Circuit

DTC P0353

- Ignition Coil 3 Control Circuit

DTC P0354

- Ignition Coil 4 Control Circuit

DTC P0355

- Ignition Coil 5 Control Circuit

DTC P0356

- Ignition Coil 6 Control Circuit

DTC P2300

- Ignition Coil 1 Control Circuit Low Voltage

DTC P2301

- Ignition Coil 1 Control Circuit High Voltage

DTC P2303

- Ignition Coil 2 Control Circuit Low Voltage

DTC P2304

- Ignition Coil 2 Control Circuit High Voltage

DTC P2306

- Ignition Coil 3 Control Circuit Low Voltage

DTC P2307

- Ignition Coil 3 Control Circuit High Voltage