Showing posts with label DTC P0219 is an informational DTC.. Show all posts
Showing posts with label DTC P0219 is an informational DTC.. Show all posts

Friday, December 3, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 1299

2010 Cadillac Truck SRX FWD V6-3.0L Page 1299



DTC P0219 is an informational DTC.



P219A



DTC P219A or P219B (LF1)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P219A



- Air Fuel Imbalance Bank 1



DTC P219B



- Air Fuel Imbalance Bank 2



Circuit/System Description



The Air Fuel Imbalance diagnostic detects a rich or lean cylinder to cylinder air/fuel ratio imbalance in each bank. The diagnostic monitors the



pre-catalyst heated oxygen sensor (HO2S) signal's frequency and amplitude characteristics by calculating an accumulated voltage over a



predetermined sample period. An imbalance is indicated when multiple samples of the accumulated voltage are consistently higher than the desired



value.



Conditions for Running the DTC



* DTCs P0053, P0059, P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0125, P0128, P0131, P0132, P0133,



P0134, P0135, P0151, P0152, P0153, P0154, P0155, P0178, P0179, P0201-P0208, P0300, P0301-P0308, P0411, P0442, P0443, P0446,



P0449, P0452, P0453, P0455, P0496, P0606, P1133, P1153, P1516, P2101, P2135, P2176, P2269, P2440, P2444, P2A00, P2A03 are not set.



* The device control is not active.



* The intrusive diagnostics are not active.



* The engine overspeed protection is not active.



* Reduced power mode, ETC DTC, is not active.



* The power take-off (PTO) is not active.



* The traction control is not active.



* The fuel control is in air-fuel Closed Loop.



* The system voltage is more than 10 V, or less than 18 V.



* The engine coolant temperature (ECT) is warmer than -20掳C (-4掳F).



* The engine speed is greater than 350 RPM, but less than 6,000 RPM.



* The mass air flow is greater than 11 g/s, but less than 510 g/s.



* Percent ethanol is less than 87 %.



Conditions for Setting the DTC



Multiple samples of the pre-catalyst HO2S accumulated voltage are consistently greater than the desired value.



Action Taken When the DTC Sets



DTCs P219A and P219B are Type B DTCs.



Conditions for Clearing the MIL/DTC



DTCs P219A and P219B are Type B DTCs.



Diagnostic Aids



* The air fuel imbalance diagnostic is very sensitive to heated oxygen sensor (HO2S) design. A non-OE sensor or an incorrect part number



may set a false DTC.



* Monitoring the misfire current counters, or misfire graph, may help to isolate the cylinder that is causing the condition.

Sunday, July 26, 2020

2010 Cadillac Truck SRX AWD V6-3.0L Page 1299

2010 Cadillac Truck SRX AWD V6-3.0L Page 1299



DTC P0219 is an informational DTC.



P219A



DTC P219A or P219B (LF1)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P219A



- Air Fuel Imbalance Bank 1



DTC P219B



- Air Fuel Imbalance Bank 2



Circuit/System Description



The Air Fuel Imbalance diagnostic detects a rich or lean cylinder to cylinder air/fuel ratio imbalance in each bank. The diagnostic monitors the



pre-catalyst heated oxygen sensor (HO2S) signal's frequency and amplitude characteristics by calculating an accumulated voltage over a



predetermined sample period. An imbalance is indicated when multiple samples of the accumulated voltage are consistently higher than the desired



value.



Conditions for Running the DTC



* DTCs P0053, P0059, P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0125, P0128, P0131, P0132, P0133,



P0134, P0135, P0151, P0152, P0153, P0154, P0155, P0178, P0179, P0201-P0208, P0300, P0301-P0308, P0411, P0442, P0443, P0446,



P0449, P0452, P0453, P0455, P0496, P0606, P1133, P1153, P1516, P2101, P2135, P2176, P2269, P2440, P2444, P2A00, P2A03 are not set.



* The device control is not active.



* The intrusive diagnostics are not active.



* The engine overspeed protection is not active.



* Reduced power mode, ETC DTC, is not active.



* The power take-off (PTO) is not active.



* The traction control is not active.



* The fuel control is in air-fuel Closed Loop.



* The system voltage is more than 10 V, or less than 18 V.



* The engine coolant temperature (ECT) is warmer than -20掳C (-4掳F).



* The engine speed is greater than 350 RPM, but less than 6,000 RPM.



* The mass air flow is greater than 11 g/s, but less than 510 g/s.



* Percent ethanol is less than 87 %.



Conditions for Setting the DTC



Multiple samples of the pre-catalyst HO2S accumulated voltage are consistently greater than the desired value.



Action Taken When the DTC Sets



DTCs P219A and P219B are Type B DTCs.



Conditions for Clearing the MIL/DTC



DTCs P219A and P219B are Type B DTCs.



Diagnostic Aids



* The air fuel imbalance diagnostic is very sensitive to heated oxygen sensor (HO2S) design. A non-OE sensor or an incorrect part number



may set a false DTC.



* Monitoring the misfire current counters, or misfire graph, may help to isolate the cylinder that is causing the condition.

Wednesday, December 11, 2019

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1156

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 1156



DTC P0219 is an informational DTC.



P0221



DTC P0121-P0123 or P0221-P0223 (Without LF1, LFW)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P0121



- Throttle Position Sensor 1 Performance



DTC P0122



- Throttle Position Sensor 1 Circuit Low Voltage



DTC P0123



- Throttle Position Sensor 1 Circuit High Voltage



DTC P0221



- Throttle Position Sensor 2 Performance



DTC P0222



- Throttle Position Sensor 2 Circuit Low Voltage



DTC P0223



- Throttle Position Sensor 2 Circuit High Voltage



Diagnostic Fault Information



Typical Scan Tool Data



Circuit/System Description



The throttle body assembly contains 2 throttle position sensors. The throttle position sensors are mounted to the throttle body assembly and are not



serviceable. The throttle position sensors provide a signal voltage that changes relative to throttle blade angle. The engine control module (ECM)



supplies the throttle position sensors with a common 5 V reference circuit , a common low reference circuit, and two independent signal circuits.