2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 1603
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
P06AE
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
* DTC P06AE has not failed set this ignition.
Conditions for Setting the DTC
P06AC - Condition 1
* Vehicle speed is greater than 8 km/h (5 mph) for 5 minutes.
* TCC slip speed is greater than 150 RPM for 5 minutes.
* The TCM power up temperature is between -40 and +150掳C (-40 and +302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 100 seconds.
* The transmission fluid temperature (TFT) is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
* TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
* The TCM temperature sensor is between 120-150掳C (248-302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 2 minutes.
* The TFT is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 3
The TCM power up temperature changes by 20掳C (36掳F) or greater 5 times over 7 seconds.
P06AD
* The TCM power up temperature is -59掳C (-74掳F) or less for 13 seconds or greater.
* The TFT is 140掳C (284掳F) or greater for 60 seconds or more.
P06AE
The TCM power up temperature is 164掳C (327掳F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P06AC, P06AD, and P06AE are Type C DTCs.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P06AC, P06AD, and P06AE are Type C DTCs.
Diagnostic Aids
During a road test, the TCM Power-Up temperature should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Description and Operation
Showing posts with label * The engine speed is 500 RPM or greater for 5 seconds.. Show all posts
Showing posts with label * The engine speed is 500 RPM or greater for 5 seconds.. Show all posts
Sunday, October 25, 2020
Friday, August 21, 2020
2010 Cadillac CTS Sedan AWD V6-3.0L Page 1611
2010 Cadillac CTS Sedan AWD V6-3.0L Page 1611
* The engine speed is 500 RPM or greater for 5 seconds.
Conditions for Setting the DTC
P0711 Condition 1
* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.
* TCC slip speed is 150 RPM or greater.
* The TFT is between -50掳C and +21掳C (-58掳F and +70掳F) at start up.
* The TFT has changed by less than 2.0掳C (3.6掳F) in 2 minutes.
* The ECT is 70掳C (158掳F) or greater.
* The ECT has increased by 55掳C (99掳F) since start-up.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 5 minutes.
* TCC slip speed is 120 RPM or greater for 5 minutes.
* The TFT is between 129-170掳C (264-507掳F).
* The TFT has changed by less than 2.0掳C (3.6掳F) in 2 minutes.
* The ECT is 70掳C (158掳F) or greater.
* The ECT has increased by 55掳C (99掳F) since start-up.
Condition 3
The TFT changes by 20掳C (36掳F) or greater 5 times over 7 seconds.
Condition 4
The TFT has not changed more than 20掳C (36掳F) during the following conditions:
* The TFT temperature at start up is -50掳C (-58掳F) for 42 minutes.
* The TFT temperature at start up is -25掳C (-13掳F) for 17 minutes.
* The TFT temperature at start up is -10掳C (14掳F) for 14 minutes.
* The TFT temperature at start up is -5掳C (23掳F) for 9 minutes.
* The TFT temperature at start up is 20掳C (68掳F) for 4 minutes.
P0712
The TFT is -74掳C (-101掳F) or less for 13 seconds or more.
P0713
The TFT is 174掳C (345掳F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P0711, P0712, and P0713 are Type C DTCs.
* The TCM freezes transmission adaptive functions.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P0711, P0712, and P0713 are Type C DTCs.
Diagnostic Aids
During a road test, the transmission fluid temperature (TFT) should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
* Component Connector End Views (See: Diagrams/Connector Views)
* Inline Harness Connector End Views (See: Power and Ground Distribution/Multiple Junction Connector/Diagrams)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Saturday, June 13, 2020
2010 Cadillac Truck Escalade RWD V8-6.2L Page 1603
2010 Cadillac Truck Escalade RWD V8-6.2L Page 1603
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
P06AE
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
* DTC P06AE has not failed set this ignition.
Conditions for Setting the DTC
P06AC - Condition 1
* Vehicle speed is greater than 8 km/h (5 mph) for 5 minutes.
* TCC slip speed is greater than 150 RPM for 5 minutes.
* The TCM power up temperature is between -40 and +150掳C (-40 and +302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 100 seconds.
* The transmission fluid temperature (TFT) is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
* TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
* The TCM temperature sensor is between 120-150掳C (248-302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 2 minutes.
* The TFT is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 3
The TCM power up temperature changes by 20掳C (36掳F) or greater 5 times over 7 seconds.
P06AD
* The TCM power up temperature is -59掳C (-74掳F) or less for 13 seconds or greater.
* The TFT is 140掳C (284掳F) or greater for 60 seconds or more.
P06AE
The TCM power up temperature is 164掳C (327掳F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P06AC, P06AD, and P06AE are Type C DTCs.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P06AC, P06AD, and P06AE are Type C DTCs.
Diagnostic Aids
During a road test, the TCM Power-Up temperature should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Description and Operation
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
P06AE
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
* DTC P06AE has not failed set this ignition.
Conditions for Setting the DTC
P06AC - Condition 1
* Vehicle speed is greater than 8 km/h (5 mph) for 5 minutes.
* TCC slip speed is greater than 150 RPM for 5 minutes.
* The TCM power up temperature is between -40 and +150掳C (-40 and +302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 100 seconds.
* The transmission fluid temperature (TFT) is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
* TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
* The TCM temperature sensor is between 120-150掳C (248-302掳F).
* The TCM power up temperature has changed by less than 2掳C (3.6掳F) in 2 minutes.
* The TFT is 70掳C (158掳F) or greater.
* The TFT has increased by 55掳C (99掳F) since startup.
Condition 3
The TCM power up temperature changes by 20掳C (36掳F) or greater 5 times over 7 seconds.
P06AD
* The TCM power up temperature is -59掳C (-74掳F) or less for 13 seconds or greater.
* The TFT is 140掳C (284掳F) or greater for 60 seconds or more.
P06AE
The TCM power up temperature is 164掳C (327掳F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P06AC, P06AD, and P06AE are Type C DTCs.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P06AC, P06AD, and P06AE are Type C DTCs.
Diagnostic Aids
During a road test, the TCM Power-Up temperature should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Description and Operation
Thursday, October 31, 2019
2010 Cadillac Truck Escalade ESV AWD V8-6.2L Page 1704
2010 Cadillac Truck Escalade ESV AWD V8-6.2L Page 1704
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
P06AE
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
* DTC P06AE has not failed set this ignition.
Conditions for Setting the DTC
P06AC - Condition 1
* Vehicle speed is greater than 8 km/h (5 mph) for 5 minutes.
* TCC slip speed is greater than 150 RPM for 5 minutes.
* The TCM power up temperature is between -40 and +150锟斤拷C (-40 and +302锟斤拷F).
* The TCM power up temperature has changed by less than 2锟斤拷C (3.6锟斤拷F) in 100 seconds.
* The transmission fluid temperature (TFT) is 70锟斤拷C (158锟斤拷F) or greater.
* The TFT has increased by 55锟斤拷C (99锟斤拷F) since startup.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
* TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
* The TCM temperature sensor is between 120-150锟斤拷C (248-302锟斤拷F).
* The TCM power up temperature has changed by less than 2锟斤拷C (3.6锟斤拷F) in 2 minutes.
* The TFT is 70锟斤拷C (158锟斤拷F) or greater.
* The TFT has increased by 55锟斤拷C (99锟斤拷F) since startup.
Condition 3
The TCM power up temperature changes by 20锟斤拷C (36锟斤拷F) or greater 5 times over 7 seconds.
P06AD
* The TCM power up temperature is -59锟斤拷C (-74锟斤拷F) or less for 13 seconds or greater.
* The TFT is 140锟斤拷C (284锟斤拷F) or greater for 60 seconds or more.
P06AE
The TCM power up temperature is 164锟斤拷C (327锟斤拷F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P06AC, P06AD, and P06AE are Type C DTCs.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P06AC, P06AD, and P06AE are Type C DTCs.
Diagnostic Aids
During a road test, the TCM Power-Up temperature should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Description and Operation
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
P06AE
* The engine speed is 500 RPM or greater for 5 seconds.
* The ignition voltage is 8.6 volts or greater.
* DTC P06AE has not failed set this ignition.
Conditions for Setting the DTC
P06AC - Condition 1
* Vehicle speed is greater than 8 km/h (5 mph) for 5 minutes.
* TCC slip speed is greater than 150 RPM for 5 minutes.
* The TCM power up temperature is between -40 and +150锟斤拷C (-40 and +302锟斤拷F).
* The TCM power up temperature has changed by less than 2锟斤拷C (3.6锟斤拷F) in 100 seconds.
* The transmission fluid temperature (TFT) is 70锟斤拷C (158锟斤拷F) or greater.
* The TFT has increased by 55锟斤拷C (99锟斤拷F) since startup.
Condition 2
* Vehicle speed is 8 km/h (5 mph) or greater for 300 seconds cumulative.
* TCC slip speed is greater than 120 RPM for 300 seconds cumulative.
* The TCM temperature sensor is between 120-150锟斤拷C (248-302锟斤拷F).
* The TCM power up temperature has changed by less than 2锟斤拷C (3.6锟斤拷F) in 2 minutes.
* The TFT is 70锟斤拷C (158锟斤拷F) or greater.
* The TFT has increased by 55锟斤拷C (99锟斤拷F) since startup.
Condition 3
The TCM power up temperature changes by 20锟斤拷C (36锟斤拷F) or greater 5 times over 7 seconds.
P06AD
* The TCM power up temperature is -59锟斤拷C (-74锟斤拷F) or less for 13 seconds or greater.
* The TFT is 140锟斤拷C (284锟斤拷F) or greater for 60 seconds or more.
P06AE
The TCM power up temperature is 164锟斤拷C (327锟斤拷F) or greater for 10 seconds or more.
Action Taken When the DTC Sets
* DTCs P06AC, P06AD, and P06AE are Type C DTCs.
* The TCM allows the vehicle to operate in transmission protection mode.
Conditions for Clearing the DTC
DTCs P06AC, P06AD, and P06AE are Type C DTCs.
Diagnostic Aids
During a road test, the TCM Power-Up temperature should steadily increase to a normal operating temperature, and then stabilize.
Reference Information
Schematic Reference
Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
Description and Operation
Subscribe to:
Posts (Atom)