Saturday, January 15, 2022

2010 Cadillac Truck SRX FWD V6-3.0L Page 1638

2010 Cadillac Truck SRX FWD V6-3.0L Page 1638



the K20 ECM.



5. If all circuits test normal, replace the P16 instrument cluster.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



* Instrument Cluster Replacement (See: Instrument Panel, Gauges and Warning Indicators/Compass/Service and Repair)



* Control Module References (See: Testing and Inspection/Programming and Relearning) for engine control module replacement, setup, and



programming



P0651



DTC P0641, P0651, P0697, or P06A3 (LF1)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC P0641



- 5 V Reference 1 Circuit



DTC P0651



- 5 V Reference 2 Circuit



DTC P0697



- 5 V Reference 3 Circuit



DTC P06A3



- 5 V Reference 4 Circuit



Circuit/System Description



The engine control module (ECM) has 4 5 V reference circuits. The ECM provides the 5 V reference to various sensors. Each reference circuit



provides a 5 V reference for more than one sensor. An open, short to ground, or short voltage on one of the 5 V reference circuits can affect all the



components connected to that 5 V reference circuit. The ECM monitors the voltage on the 5 V reference circuits.



Conditions for Running the DTC



DTCs P0641, P0651, P0697, P06A3 run continuously when the ignition is ON.



Conditions for Setting the DTC



The 5 V reference circuit voltage is greater or less than a predetermined threshold.



Action Taken When the DTC Sets



DTCs P0641, P0651, P0697, and P06A3 are Type A DTCs.



Conditions for Clearing the DTC



DTCs P0641, P0651, P0697, and P06A3 are Type A DTCs.



Diagnostic Aids



P0641



The 5 V reference 1 circuit provides 5 V to the following sensors:



* B150 fuel tank pressure (FTP) sensor



* B17 barometric pressure (BARO) sensor, throttle inlet absolute pressure sensor