2010 Cadillac Truck SRX FWD V6-3.0L Page 852
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptors
DTC C0595 02
- Left Front Acceleration Sensor Circuit Short to Ground
DTC C0595 05
- Left Front Acceleration Sensor Circuit High Voltage/Open
DTC C0595 0A
- Left Front Acceleration Sensor Circuit Too Slow Transitions
DTC C0600 02
- Right Front Acceleration Sensor Circuit Short to Ground
DTC C0600 05
- Right Front Acceleration Sensor Circuit High Voltage/Open
DTC C0600 0A
- Right Front Acceleration Sensor Circuit Too Slow Transitions
DTC C0605 02
- Left Rear Acceleration Sensor Circuit Short to Ground
DTC C0605 05
- Left Rear Acceleration Sensor Circuit High Voltage/Open
DTC C0605 0A
- Left Rear Acceleration Sensor Circuit Too Slow Transitions
Diagnostic Fault Information
Circuit/System Description
The suspension control module supplies a 5 V reference voltage and a low reference to each body acceleration sensor. The body acceleration
sensors supply a signal of 0.5-4.5 V to the suspension control module.
Conditions for Running the DTC
System voltage is between 9-16 V
