2010 Cadillac CTS Sedan AWD V6-3.6L Page 1138
DTC Descriptors
DTC P0192
- Fuel Rail Pressure Sensor Circuit Low Voltage
DTC P0193
- Fuel Rail Pressure Sensor Circuit High Voltage
Diagnostic Fault Information
Circuit/System Description
The fuel rail fuel pressure sensor detects fuel pressure within the fuel rail. The engine control module (ECM) provides a 5 V reference voltage on
the 5 V reference circuit and ground on the reference ground circuit. The ECM receives a varying signal voltage on the signal circuit. The ECM
monitors the voltage on the fuel rail fuel pressure sensor circuits. When the fuel pressure is high, the signal voltage is high. When the fuel pressure
is low, the signal voltage is low.
Conditions for Running the DTC
* The ignition is ON or the engine is running.
* The DTCs run continuously within the enabling conditions.
Conditions for Setting the DTC
P0192
The ECM detects that the signal circuit voltage is less than 0.2 V for greater than 5 seconds.
P0193
The ECM detects that the signal circuit voltage is greater than 4.8 V for greater than 5 seconds.
Action Taken When the DTC Sets
* DTCs P0192 and P0193 are Type A DTCs.
* A message center or an indicator may display Reduced Engine Power.
Conditions for Clearing the DTC
DTCs P0192 and P0193 are Type A DTCs.
Reference Information
Schematic Reference
Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics
(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Fuel System Description (See: Powertrain Management/Computers and Control Systems/Description and Operation/Fuel System Description)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code
