2010 Cadillac CTS Sedan AWD V6-3.6L Page 548
The security indicator will illuminate.
Conditions for Clearing the DTC
* A current DTC B3031 will be cleared upon the successful exit of learn mode.
* A history DTC will be cleared after 100 malfunction-free ignition cycles or when a scan tool is used to clear DTCs.
Reference Information
Schematic Reference
Immobilizer Schematics (See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Diagrams/Electrical Diagrams/Immobilizer
Schematics)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Immobilizer Description and Operation (without Y41) (See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Description and
Operation/Immobilizer Description and Operation (Without Y41))Immobilizer Description and Operation (with Y41) (See: Accessories and
Optional Equipment/Antitheft and Alarm Systems/Description and Operation/Immobilizer Description and Operation (With Y41))
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Circuit/System Verification
Important: When performing the 10-Minute Vehicle Key Relearn Procedure, all keys not learned at that time will be erased and not be
recognized. Perform the Adding Keys procedure on all keys or instruct the customer how to perform the Adding Keys procedure should
all keys not be present at the time of repair.
1. Verify DTC B3055 is not set.
瀚慖f the DTC is set, refer to DTC B3055 (See: B Code Charts/B3055).
2. Verify the scan tool TDM Learn Coded Key parameter displays Yes.
瀚慖f not the specified value, perform the 10 Minute Vehicle Key Relearn procedure. Refer to Replacing Keys (North America except
Canada) (See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Service and Repair/Replacing Keys (North America
except Canada))Replacing Keys (Canada, Europe, and Asia) (See: Application and ID).
3. Perform the 10 Minute Vehicle Key Relearn procedure. Refer to Replacing Keys (North America except Canada) (See: Accessories and
Optional Equipment/Antitheft and Alarm Systems/Service and Repair/Replacing Keys (North America except Canada))Replacing Keys
(Canada, Europe, and Asia) (See: Application and ID). The TDM should exit the learn coded key state and DTC B3031 should clear.
瀚慖f the TDM does not exit the learn coded key state after the programming attempt, replace the TDM.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.
Control Module References (See: Testing and Inspection/Programming and Relearning) for TDM replacement, setup and programming
B3055
DTC B3055
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
