2010 Cadillac CTS Sedan AWD V6-3.6L Page 77
Conditions for Running the DTC
Ignition voltage is between 9-16 volts.
Conditions for Setting the DTC
B0012 01 Stage 1 or B0013 01 Stage 2
The steering wheel module high and/or low circuit is shorted to voltage for 120 milliseconds.
B0012 02 Stage 1 or B0013 02 Stage 2
The steering wheel module high and/or low circuit is shorted to ground for 120 milliseconds.
B0012 04 Stage 1 or B0013 04 Stage 2
The steering wheel module high and/or low circuit is open for 120 milliseconds.
B0012 0D Stage 1 or B0013 0D Stage 2
The steering wheel module deployment loop resistance is greater than 5.1 ohms for 120 milliseconds.
B0012 0E Stage 1 or B0013 0E Stage 2
The steering wheel module deployment loop resistance is less than 1.3 ohms for 120 milliseconds.
Action Taken When the DTC Sets
* The SDM request the instrument panel cluster (IPC) to illuminate the AIR BAG indicator ON.
* The SIR system is disabled and no deployments are allowed.
* The SDM will store a DTC, however if an event occurs the system will still attempt deployments.
Conditions for Clearing the DTC
* The condition for setting the DTC no longer exists.
* A history DTC will clear once 100 malfunction-free ignition cycles have occurred.
Reference Information
Schematic Reference
SIR Schematics (See: Diagrams/Electrical Diagrams/Air Bag Systems)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
SIR System Description and Operation (See: Restraints and Safety Systems/Air Bag Systems/Description and Operation/SIR System Description
and Operation)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Special Tools
* J 38715-A SIR Driver/Passenger Load Tool
* SA9409Z-A SIR Driver/Passenger Load Tool
Circuit/System Testing
Important:
* Refer to SIR Service Precautions (See: Restraints and Safety Systems/Air Bag Systems/Service Precautions/Technician Safety
