2010 Cadillac CTS Sedan AWD V6-3.6L Page 707
Repair Instructions
Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.
* Parking Brake Switch Replacement (See: Brakes and Traction Control/Parking Brake System/Parking Brake Warning Switch/Service and
Repair/Parking Brake Switch Replacement)
* Electronic Parking Brake Control Module Replacement (See: Brakes and Traction Control/Parking Brake System/Parking Brake Control
Module/Service and Repair)
* Control Module References (See: Testing and Inspection/Programming and Relearning) for electric parking brake module replacement,
setup, and programming
C0297
DTC C0297
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC C0297 00
- Brake Applied Output Circuit
Diagnostic Fault Information
Circuit/System Description
North America
The brake pedal position sensor is used to sense the action of the driver application of the brake pedal. The brake pedal position sensor provides an
analog voltage signal that will increase as the brake pedal is applied. The body control module (BCM) provides a low reference signal and a 5 V
