Saturday, January 23, 2021

2010 Cadillac CTS Sedan AWD V6-3.6L Page 257

2010 Cadillac CTS Sedan AWD V6-3.6L Page 257



Multiple Object Alarm Sensor DTCs Set



1. Ignition OFF, disconnect the harness connector at each of the object alarm sensors.



2. Ignition OFF for 30 seconds, test for less than 20 Ohms between the low reference circuit terminal 2 and ground.



瀚慖f greater than the specified range, test the low reference circuit for an open/high resistance. If the circuit tests normal, replace the rear



object sensor control module.



3. Ignition ON, transmission in REVERSE, test for 8.0-9.0 V between the voltage reference circuit terminal 1 and ground.



瀚慖f greater than the specified range, test the voltage reference circuit for a short to voltage. If the circuit tests normal, replace the rear object



sensor control module.



瀚慖f less than the specified range, test the voltage reference circuit for a short to ground or an open/high resistance. If the circuit tests



normal, replace the rear object sensor control module.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



* Rear Object Sensor Replacement (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking



Assist Distance Sensor/Service and Repair/Rear Object Sensor Replacement)



* Control Module References (See: Testing and Inspection/Programming and Relearning) for Object Alarm Module replacement, setup, and



programming.



Audio Only



DTC B0958, B0959, B0960, or B0961 (Audio Only)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using the diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provides an overview of each diagnostic category.



DTC Descriptors



DTC B0958 01



- Parking Aid Rear Sensor 1 Circuit Short to Battery



DTC B0958 06



- Parking Aid Rear Sensor 1 Circuit Short to Ground or Open



DTC B0958 08



- Parking Aid Rear Sensor 1 Circuit Signal Invalid



DTC B0958 21



- Parking Aid Rear Sensor 1 Circuit Incorrect Period



DTC B0958 3A



- Parking Aid Rear Sensor 1 Circuit Incorrect Component Installed



DTC B0959 01



- Parking Aid Rear Sensor 2 Circuit Short to Battery



DTC B0959 06



- Parking Aid Rear Sensor 2 Circuit Short to Ground or Open



DTC B0959 08



- Parking Aid Rear Sensor 2 Circuit Signal Invalid



DTC B0959 21



- Parking Aid Rear Sensor 2 Circuit Incorrect Period



DTC B0959 3A



- Parking Aid Rear Sensor 2 Circuit Incorrect Component Installed