2010 Cadillac CTS Sedan AWD V6-3.6L Page 1009
- Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage
DTC P0108
- Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
Diagnostic Fault Information
Typical Scan Tool Data
Circuit Description
The manifold absolute pressure (MAP) sensor has a 5 V reference circuit, a low reference circuit, and a signal circuit. The engine control module
(ECM) supplies 5 V to the MAP sensor on the 5 V reference circuit, and provides a ground for the low reference circuit. The MAP sensor provides
a voltage signal to the ECM on the signal circuit relative to the intake manifold pressure changes.
Conditions for Running the DTC
* DTC P0697 is not set.
* The engine is running.
* This DTC runs continuously within the enabling conditions.
Conditions for Setting the DTC
P0107
The ECM detects that the MAP sensor voltage is less than 0.20 V for more than 5 s.
P0108
The ECM detects that the MAP sensor voltage is more than 4.80 V for more than 5 s.
Action Taken When the DTC Sets
DTCs P0107 and P0108 are Type B DTCs.
Conditions for Clearing the MIL/DTC
DTCs P0107 and P0108 are Type B DTCs.
Reference Information
Schematic Reference
Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics
(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
