Wednesday, December 2, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 910

2010 Cadillac CTS Sedan AWD V6-3.6L Page 910



Action Taken When the DTC Sets



* DTCs P029D, P02A1, P02A5, P02A9, P02AD, and P02B1 are Type A DTCs.



* The control module commands the engine to operate in the Reduced Engine Power mode.



* The message center displays Reduced Engine Power.



Conditions for Clearing the DTC



DTCs P029D, P02A1, P02A5, P02A9, P02AD, and P02B1 are Type A DTCs.



Diagnostic Aids



A fuel injector leak into the combustion chamber may result in mechanical damage to the cylinder.



Reference Information



Schematic Reference



Engine Controls Schematics (LLT) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics



(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views)



Description and Operation



Fuel System Description (See: Powertrain Management/Computers and Control Systems/Description and Operation/Fuel System Description)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit



Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)



Scan Tool Reference



Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information



DTC Type Reference



Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code



(DTC) Type Definitions)



Circuit/System Verification



1. Clear the DTC information with a scan tool.



2. Engine operating, raise the engine speed to 2,000 RPM. Observe the DTC information with a scan tool. DTC P029D, P02A1, P02A5,



P02A9, P02AD, or P02B1 should not set.



瀚慖f a DTC failed this ignition, test or replace the appropriate Q17 fuel injector.



3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the



conditions that you observed from the Freeze Frame/Failure Records data.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Fuel Injector Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector



Replacement)



P0030



DTC P0030, P0031, P0032, P0036, P0037, P0038, P0050, P0051, P0052, P0056, P0057, or P0058 (LLT)



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an