2010 Cadillac CTS Sedan AWD V6-3.6L Page 354
Circuit/System Description
The memory seat module (MSM) monitors the current supplied to the driver seat adjuster motors, recline motor and the lumbar motors. It can detect
both absolute and differential current levels from the seat motors. Absolute current is the maximum allowable current the module will supply to the
motors. A differential current mismatch occurs when the current supplied to the seat motors does not match the current returning from the motors.
Conditions for Running the DTC
The seat adjuster motors, recline motor or the lumbar motor must be active.
Conditions for Setting the DTC
B1335 0B
The absolute current or an over-current has exceeded the maximum value allowed.
B1335 42
This DTC will set if the module calibration is not programmed.
B1335 4B
This DTC will set if the module calibration is out of range.
Action Taken When the DTC Sets
All movement related to the seat cushion motors, recline and driver seat lumbar motors is aborted.
Conditions for Clearing the DTC
* The current DTC will clear and set the code to history, 3 seconds after no motor movement is requested or the current is no longer
mismatched, and the ignition is cycled OFF then back to ACC or RUN.
* The history DTC will clear after 50 consecutive fault-free ignition cycles have occurred.
Reference Information
Schematic Reference
Driver Seat Schematics (See: Body and Frame/Seats/Diagrams/Electrical Diagrams/Driver Seat Schematics)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Memory Seats Description and Operation (See: Body and Frame/Seats/Description and Operation/Memory Seats)
Electrical Information Reference
