Tuesday, November 24, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 224

2010 Cadillac CTS Sedan AWD V6-3.6L Page 224



- Air Flow Control 7 Feedback Circuit Short to Ground or Open



Diagnostic Fault Information



Circuit/System Description



The HVAC control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Each actuator consists of an



electric motor and a potentiometer. The module supplies a low reference and 5-volt reference source voltage to the potentiometer. The HVAC



control module monitors the voltage drop across the potentiometer on the door position signal circuit. When the actuator shaft rotates, the voltage



on the door position signal circuit changes. The HVAC module controls the direction of the actuator door by changing the polarity of the control



circuits.



* Air Flow Control 3 is the mode actuator



* Air Flow Control 7 is the recirculation actuator



* Temperature Control 1 is the left temperature actuator



* Temperature Control 2 is the right temperature actuator



Conditions for Running the DTC



* Ignition ON.



* Ignition voltage is between 9-16 volts.



* The HVAC module is ON.



Conditions for Setting the DTC



The actual door position differs from the commanded door position by more than 4 counts or the HVAC control module detects the door position



signal circuit is less than 7 counts or greater than 250 counts.



Action Taken When the DTC Sets



Control A and control B circuits are deactivated for the appropriate actuator.



Conditions for Clearing the DTC