Friday, September 18, 2020

2010 Cadillac Truck SRX AWD V6-3.0L Page 722

2010 Cadillac Truck SRX AWD V6-3.0L Page 722



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptors



DTC B3887 02



- Trailer Left Turn Signal Circuit Short to Ground



DTC B3887 04



- Trailer Left Turn Signal Circuit Open



DTC B3888 02



- Trailer Right Turn Signal Circuit Short to Ground



DTC B3888 04



- Trailer Right Turn Signal Circuit Open



Diagnostic Fault Information



Circuit/System Description



When the appropriate turn signals are activated, the BCM will apply a pulsating ground to the appropriate trailer stop/turn signal lamp relay.



Conditions for Running the DTC



The system voltage is 9-16 V.



Conditions for Setting the DTC



B3887 02 or B3888 02



The BCM detects a short to ground on the appropriate trailer turn signal control circuit.



B3887 04 or B3888 04



The BCM detects an open/high resistance on the appropriate trailer turn signal control circuit



Action Taken When the DTC Sets



The appropriate trailer turn signal lamp will be inoperative.



Conditions for Clearing the DTC



* The DTC will be current for as long as the fault is present.



* When the fault is no longer present, the DTC will be a history DTC.



* A history DTC will clear after 40 ignition cycles.



Reference Information



Schematic Reference



Trailer Connector/Provision Schematics (See: Diagrams/Electrical Diagrams/Starting and Charging/Power and Ground Distribution/System



Diagram/Trailer Connector/Provision Schematics)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation