Wednesday, August 5, 2020

2010 Cadillac Truck Escalade RWD V8-6.2L Page 2877

2010 Cadillac Truck Escalade RWD V8-6.2L Page 2877

Circuit/System Description

Modules connected to the high and low speed GMLAN serial data circuits monitor for serial data communications during normal vehicle operation.

Operating information and commands are exchanged among the modules. The modules have prerecorded information about what messages are

needed to be exchanged on the serial data circuits, for each virtual network. The messages are supervised and also, some periodic messages are

used by the receiver module as an availability indication of the transmitter module. Each message contains the identification number of the

transmitter module.

The serial data communication enable and the accessory wake up serial data circuits are energized by a specific module to activate another specific

module when the ignition key is in ACC, ON or START. Only the modules using high speed GMLAN serial data are connected to the enable or

wake up circuits. Refer to the schematics to determine which modules activate and are activated using the enable or wake up circuits.

Conditions for Running the DTC

* The system voltage is between 9-16 volts.

* The vehicle power mode master requires serial data communication to occur fro this specific module.

Conditions for Setting the DTC

A supervised periodic message that includes the transmitter module availability has not been received.

Action Taken When the DTC Sets

The modules is never signaled, therefore the specific subsystems will not function.

Conditions for Clearing the DTC

* A current DTC clears when the malfunction is no longer present.

* A history DTC clears when the module ignition cycle counter reaches the reset threshold of 50, without a repeat of the malfunction.

Circuit/System Verification

With a scan tool, ensure the following DTCs are not present in the modules as follows:

BCM

U2099

PSCM

U0146

SDGM

* SDGM - U0111

* SDGM - B1453

If any listed DTC is present, refer to Diagnostic Trouble Code (DTC) List - Vehicle (See: Diagnostic Trouble Code Descriptions/Diagnostic

Trouble Code (DTC) List - Vehicle) to diagnose that DTC prior to this diagnostic.