2010 Cadillac Truck Escalade RWD V8-6.2L Page 1549
This diagnostic applies to internal microprocessor integrity conditions within the drive motor generator battery control module. This is an internal
electronic fault detection diagnostic of the drive motor generator battery control module. This fault is internal to the drive motor generator battery
control module and no external circuits are involved.
Conditions for Running the DTC
The ignition is ON.
Conditions for Setting the DTC
The drive motor generator battery control module has detected an internal malfunction.
Action Taken When the DTC Sets
* DTCs P0A1F, P1A01, P1A05, and P1A06 are type A DTCs.
* The contactors will open.
* The malfunction indicator lamp (MIL) turns ON.
Conditions for Clearing the DTC
DTCs P0A1F, P1A01, P1A05, and P1A06 are type A DTCs.
Reference Information
Schematic Reference
Hybrid Energy Storage Schematics ()
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Drive Motor Battery System Description ()
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit
Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic
Procedures/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General
Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring
Repairs/Wiring Repairs)
DTC Type Reference
Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code
(DTC) Type Definitions)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Special Tools
EL-48900 HEV Safety Kit
Circuit/System Verification
Verify that DTC P0A1F, P1A01, P1A05, or P1A06 is not set.
If any of the DTCs are set, replace the drive motor generator battery control module.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the repair.
Control Module References (See: Testing and Inspection/Programming and Relearning) for drive motor generator battery control module
replacement, setup and programming
