2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 774
- Left Rear Wheel Speed Sensor Circuit Not Plausible
DTC C0050 06
- Right Rear Wheel Speed Sensor Circuit Low Voltage/Open
DTC C0050 0F
- Right Rear Wheel Speed Sensor Circuit Signal Erratic
DTC C0050 18
- Right Rear Wheel Speed Sensor Circuit Low Signal Amplitude
DTC C0050 5A
- Right Rear Wheel Speed Sensor Circuit Not Plausible
Diagnostic Fault Information
Circuit/System Description
The wheel speeds are detected by active wheel speed sensors and encoder rings. The encoder ring consists of permanent magnets. Each wheel
speed sensor receives 12 V reference voltages from the electronic brake control module (EBCM). The wheel speed sensor produces changing
current between 7-14 mA on the EBCM signal circuit. As the wheel spins, the EBCM uses the frequency of the square wave signal to calculate the
actual wheel speed.
Conditions for Running the DTC
C0035 06 - C0050 06
Ignition ON
C0035 0F - C0050 0F
* Ignition ON
* Vehicle speed is greater than 35 km/h (22 mph)
C0035 18 - C0050 18
* Ignition ON
* Vehicle speed is greater than 10 km/h (6 mph)
C0035 5A - C0050 5A
* Ignition ON
* Vehicle speed is greater than 20 km/h (13 mph)
Conditions for Setting the DTC
