Tuesday, April 21, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1730

2010 Cadillac CTS Sedan AWD V6-3.6L Page 1730



* The ignition voltage is 8.6 volts or greater.



* The engine run time is greater than 5 seconds.



* The clutch PC solenoid 2 is commanded ON.



Conditions for Setting the DTC



P0965



The TCM detects an internal electrical performance malfunction of the clutch PC solenoid 2 control circuit where the measured clutch PC solenoid



2 current does not equal the commanded clutch PC solenoid 2 current for 5 seconds.



P0966



The TCM detects a short to ground on the clutch PC solenoid 2 control circuit for 1 second.



P0967



The TCM detects an open or short to voltage on the clutch PC solenoid 2 control circuit, for 1 second.



Action Taken When the DTC Sets



P0965



* DTC P0965 is a Type C DTC.



* The TCM freezes transmission adaptive functions.



P0966



* DTC P0966 is a Type A DTC.



* The TCM forces HSD1 OFF.



* The TCM forces TCC OFF.



* The TCM freezes transmission adaptive functions.



* The TCM commands maximum line pressure.



* The TCM enables Torque management.



* The TCM inhibits TAP Up/Down function.



* The TCM defaults the transmission to a limited shift pattern utilizing 2 forward gears and reverse gear based on the fault detected.



* The TCM inhibits manual shifting of forward gears.



P0967



* DTC P0967 is a Type A DTC.



* The TCM defaults the transmission to 3rd gear or reverse gear.



* The TCM forces TCC OFF.



* The TCM freezes transmission adaptive functions.



* The TCM commands maximum line pressure.



* The TCM enables Torque management.



* The TCM inhibits TAP Up/Down function.



* The TCM inhibits manual shifting of forward gears.



Conditions for Clearing the DTC



* DTC P0965 is a Type C DTC.



* DTCs P0966 and P0967 are Type A DTCs.



Reference Information



Schematic Reference



Automatic Transmission Controls Schematics (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Diagrams)



Connector End View Reference



* Component Connector End Views (See: Diagrams/Connector Views)



* Inline Harness Connector End Views (See: Power and Ground Distribution/Multiple Junction Connector/Diagrams)



Description and Operation



* Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Transmission General Description)



* Transmission Component and System Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Transmission Component and System Description)



* Electronic Component Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and



Operation/Electronic Component Description)



Electrical Information Reference