2010 Cadillac CTS Sedan AWD V6-3.6L Page 304

2010 Cadillac CTS Sedan AWD V6-3.6L Page 304

DTC B1055 02

- Audio Output 4 Right Rear Circuit Short to Ground (RR Door)

DTC B1055 04

- Audio Output 4 Right Rear Circuit Open (RR Door)

DTC B1065 01

- Audio Output 5 Circuit Short to Battery (Center IP)

DTC B1065 02

- Audio Output 5 Circuit Short to Ground (Center IP)

DTC B1065 04

- Audio Output 5 Circuit Open (Center IP)

DTC B1075 01

- Audio Output 6 Circuit Short to Battery (Subwoofer)

DTC B1075 02

- Audio Output 6 Circuit Short to Ground (Subwoofer)

DTC B1085 01

- Audio Output 7 Circuit Short to Battery (LR Shelf)

DTC B1085 02

- Audio Output 7 Circuit Short to Ground (LR Shelf)

DTC B1085 04

- Audio Output 7 Circuit Open (LR Shelf)

DTC B1095 01

- Audio Output 8 Circuit Short to Battery (RR Shelf)

DTC B1095 02

- Audio Output 8 Circuit Short to Ground (RR Shelf)

DTC B1095 04

- Audio Output 8 Circuit Open (RR Shelf)

DTC B1105 01

- Audio Output 9 Circuit Short to Battery (LF I/P Tweeter)

DTC B1105 02

- Audio Output 9 Circuit Short to Ground (LF I/P Tweeter)

DTC B1105 04

- Audio Output 9 Circuit Open (LF I/P Tweeter)

DTC B1115 01

- Audio Output 10 Circuit Short to Battery (RF I/P Tweeter)

DTC B1115 02

- Audio Output 10 Circuit Short to Ground (RF I/P Tweeter)

DTC B1115 04

- Audio Output 10 Circuit Open (RF I/P Tweeter)

Diagnostic Fault Information

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 387

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 387

DTC B1055 02

- Audio Output 4 Right Rear Circuit Short to Ground

DTC B1055 04

- Audio Output 4 Right Rear Circuit Open

DTC B1065 01

- Audio Output 5 Circuit Short to Battery (Center IP)

DTC B1065 02

- Audio Output 5 Circuit Short to Ground (Center IP)

DTC B1065 04

- Audio Output 5 Circuit Open (Center IP)

DTC B1075 01

- Audio Output 6 Circuit Short to Battery (Subwoofer)

DTC B1075 02

- Audio Output 6 Circuit Short to Ground (Subwoofer)

DTC B1075 04

- Audio Output 6 Circuit Open (Subwoofer)

DTC B1085 01

- Audio Output 7 Circuit Short to Battery (LR D-Pillar)

DTC B1085 02

- Audio Output 7 Circuit Short to Ground (LR D-Pillar)

DTC B1085 04

- Audio Output 7 Circuit Open (LR D-Pillar)

DTC B1095 01

- Audio Output 8 Circuit Short to Battery (RR D-Pillar)

DTC B1095 02

- Audio Output 8 Circuit Short to Ground (RR D-Pillar)

DTC B1095 04

- Audio Output 8 Circuit Open (RR D-Pillar)

Diagnostic Fault Information

Circuit/System Description

Each of the audio output channel circuits (+) and (-), at the radio and audio amplifier have a DC bias voltage that is one half of the battery voltage.

When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is

produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone

to move and produce sound. This voltage will vary depending on what type of audio is being listened to, talk or music, and type of music, as well as

the volume setting of the system. Low volume and talk settings will measure around 1V AC and less, where constant music may measure 3V AC

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 386

2010 Cadillac Truck Escalade RWD V8-6.0L Hybrid Page 386

DTC B1055 02

- Audio Output 4 Right Rear Circuit Short to Ground

DTC B1055 04

- Audio Output 4 Right Rear Circuit Open

DTC B1065 01

- Audio Output 5 Circuit Short to Battery (Center IP)

DTC B1065 02

- Audio Output 5 Circuit Short to Ground (Center IP)

DTC B1065 04

- Audio Output 5 Circuit Open (Center IP)

DTC B1075 01

- Audio Output 6 Circuit Short to Battery (Subwoofer)

DTC B1075 02

- Audio Output 6 Circuit Short to Ground (Subwoofer)

DTC B1075 04

- Audio Output 6 Circuit Open (Subwoofer)

DTC B1085 01

- Audio Output 7 Circuit Short to Battery (LR D-Pillar)

DTC B1085 02

- Audio Output 7 Circuit Short to Ground (LR D-Pillar)

DTC B1085 04

- Audio Output 7 Circuit Open (LR D-Pillar)

DTC B1095 01

- Audio Output 8 Circuit Short to Battery (RR D-Pillar)

DTC B1095 02

- Audio Output 8 Circuit Short to Ground (RR D-Pillar)

DTC B1095 04

- Audio Output 8 Circuit Open (RR D-Pillar)

Diagnostic Fault Information

Circuit/System Description

Each of the audio output channel circuits (+) and (-), at the radio and audio amplifier have a DC bias voltage that is one half of the battery voltage.

When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is

produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone

to move and produce sound. This voltage will vary depending on what type of audio is being listened to, talk or music, and type of music, as well as

the volume setting of the system. Low volume and talk settings will measure around 1V AC and less, where constant music may measure 3V AC

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 401

2010 Cadillac Truck Escalade EXT AWD V8-6.2L Page 401

DTC B1055 02

- Audio Output 4 Right Rear Circuit Short to Ground

DTC B1055 04

- Audio Output 4 Right Rear Circuit Open

DTC B1065 01

- Audio Output 5 Circuit Short to Battery (Center IP)

DTC B1065 02

- Audio Output 5 Circuit Short to Ground (Center IP)

DTC B1065 04

- Audio Output 5 Circuit Open (Center IP)

DTC B1075 01

- Audio Output 6 Circuit Short to Battery (Subwoofer)

DTC B1075 02

- Audio Output 6 Circuit Short to Ground (Subwoofer)

DTC B1075 04

- Audio Output 6 Circuit Open (Subwoofer)

DTC B1085 01

- Audio Output 7 Circuit Short to Battery (LR D-Pillar)

DTC B1085 02

- Audio Output 7 Circuit Short to Ground (LR D-Pillar)

DTC B1085 04

- Audio Output 7 Circuit Open (LR D-Pillar)

DTC B1095 01

- Audio Output 8 Circuit Short to Battery (RR D-Pillar)

DTC B1095 02

- Audio Output 8 Circuit Short to Ground (RR D-Pillar)

DTC B1095 04

- Audio Output 8 Circuit Open (RR D-Pillar)

Diagnostic Fault Information

Circuit/System Description

Each of the audio output channel circuits (+) and (-), at the radio and audio amplifier have a DC bias voltage that is one half of the battery voltage.

When using a DMM, each of the audio output channel circuits will measure approximately 6.5V DC. The audio being played on the system is

produced by a varying AC voltage that is centered around the DC bias voltage on the same circuit. The AC voltage is what causes the speaker cone

to move and produce sound. This voltage will vary depending on what type of audio is being listened to, talk or music, and type of music, as well as

the volume setting of the system. Low volume and talk settings will measure around 1V AC and less, where constant music may measure 3V AC