Saturday, November 21, 2020

2010 Cadillac CTS Sedan AWD V6-3.6L Page 656

2010 Cadillac CTS Sedan AWD V6-3.6L Page 656



Action Taken When the DTC Sets



A DIC message and/or a warning indicator may be displayed.



Conditions for Clearing the DTC



* The electric parking brake module clears the history DTC when a current DTC is not detected in 40 consecutive drive cycles.



* Adjust or replace the park brake pads.



Reference Information



Schematic Reference



Park Brake System Schematics (See: Brakes and Traction Control/Parking Brake System/Diagrams/Electrical Diagrams)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views)



Description and Operation



Electronic Parking Brake Control Module Description (See: Brakes and Traction Control/Parking Brake System/Parking Brake Control



Module/Description and Operation)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit



Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)



Scan Tool Reference



Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information



Circuit/System Verification



Verify DTC C028D is not set.



If DTC is set, replace the brake pads and perform the Parking Brake Shoe Service Reset procedure.



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



Control Module References (See: Testing and Inspection/Programming and Relearning) for Electric Parking Brake Module replacement, setup,



and programming.



C028F



DTC C028F



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions) provide an overview of each diagnostic category.



DTC Descriptors



DTC C028F 01



- Park Brake Solenoid Actuator Circuit Short to Battery



DTC C028F 02



- Park Brake Solenoid Actuator Circuit Short to Ground



DTC C028F 08



- Park Brake Solenoid Actuator Circuit Performance-Signal Invalid