2010 Cadillac Truck Escalade ESV AWD V8-6.2L Page 576
- Left Seat Front Vertical Position Sensor Circuit Plausibility Failure
DTC B2365 01
- Left Seat Rear Vertical Position Sensor Circuit Short to Battery
DTC B2365 06
- Left Seat Rear Vertical Position Sensor Circuit Short to Ground or Open
DTC B2365 5A
- Left Seat Rear Vertical Position Sensor Circuit Plausibility Failure
DTC B2375 01
- Left Seat Assembly Horizontal Position Sensor Circuit Short to Battery
DTC B2375 06
- Left Seat Assembly Horizontal Position Sensor Circuit Short to Ground or Open
DTC B2375 5A
- Left Seat Assembly Horizontal Position Sensor Circuit Plausibility Failure
Diagnostic Fault Information
Circuit Description
The position sensor that sets this diagnostic trouble code (DTC) is either attached to the seat directional motor drive cable or directly to the motor it
monitors. It receives a 5-volt reference and ground from the memory seat module (MSM). The sensor sends a voltage signal that varies with the
movement of the seat through the signal circuit to the MSM. Then based on this voltage signal, the MSM determines the position of the seat.
Conditions for Running the DTC
The memory seat module must be powered.
Conditions for Setting the DTC
B1825 01, B1850 01, B1860 01, B2355 01, B2365 01, B2375 01
If the MSM sees the analog input from this sensor is greater than 4.75 volts, the sensor will be considered out of range and the MSM will set this
DTC.
B1825 06, B1850 06, B1860 06, B2355 06, B2365 06, B2375 06
If the MSM sees the analog input from this sensor is less than 0.22 volts, the sensor will be considered out of range and the MSM will set this DTC.
